If you shop at Amazon.com (for anything), use this link to support FordTaurus.net!

2013 bumper on 2011

Post Reply
MUD
New Member
Posts: 1
Joined: Thu Jun 27, 2019 6:26 pm
Vehicle: 2011

2013 bumper on 2011

Post by MUD » Thu Jun 27, 2019 6:33 pm

Hey guys, my first time sharing on here.
I have a Ford Taurus 2011 SEL and I want it to look like the newer models by using the same front bumper and headlights, so is that possible?


13FTPI_driver
New Member
Posts: 8
Joined: Mon Jul 03, 2017 11:51 am
Vehicle: 2013 Taurus Police Interceptor

Re: 2013 bumper on 2011

Post by 13FTPI_driver » Sat Jun 29, 2019 7:51 pm

Can you share some photos of the 2011? I took my front end off last summer to replace the transmission intercooler. It can be done solo, but better/easier with two (and a hydraulic car lift....(;^])
On a related note, I need to take the rear bumper off enough to re-attach it and make it look right. Got rear-ended last weekend, and while there's only minor cosmetic damage, the plastic bumper is spring under the L tail-light and where it connects with the black bottom trim on the opposite side. I just want to get everything evened up and replace the one broken reflector. Does anyone have drawings on what the correct procedure would be for rear bumper r&r? Thanks in advance.

13FTPI_driver
New Member
Posts: 8
Joined: Mon Jul 03, 2017 11:51 am
Vehicle: 2013 Taurus Police Interceptor

Re: 2013 bumper on 2011

Post by 13FTPI_driver » Sat Jun 29, 2019 8:03 pm

Would it help if I posted some pics of my 2013? Can you tell me what locations you want details about? If you post some photos of where you want information, it would guide me in getting good shots to post for you.

Post Reply