If you shop at Amazon.com (for anything), use this link to support FordTaurus.net!

2011 SHO gear shift knob replacement

Post Reply
chgoken
New Member
Posts: 2
Joined: Sat Jul 12, 2014 8:24 am

2011 SHO gear shift knob replacement

Post by chgoken » Sat Jul 12, 2014 11:10 am

Anyone have the instruction on how to replace the gear shift knob on a 2011 SHO. I just ordered an OEM replacement.


chgoken
New Member
Posts: 2
Joined: Sat Jul 12, 2014 8:24 am

Re: 2011 SHO gear shift knob replacement

Post by chgoken » Wed Jul 16, 2014 6:15 pm

I just fixed my 2011 Taurus SHO. I used a plastic trim tool and a screwdriver, just pried the chrome ring ( that the leather boot is fixed to) down from the shifter handle. This exposed the two loose T20 Torx screws. Then I just pulled back up on the chrome trim ring and snapped it back in place.

gregwinokur1215
New Member
Posts: 3
Joined: Tue Jul 29, 2014 5:17 pm

Re: 2011 SHO gear shift knob replacement

Post by gregwinokur1215 » Tue Jul 29, 2014 5:20 pm

Thanks guys...just the information I was looking for. Shift knob is loose after 139,000 miles on my 2010 SHO.

Best regards.

Greg

bdfrench
New Member
Posts: 1
Joined: Sat Nov 04, 2017 5:48 pm
Vehicle: 2011 SHO

Re: 2011 SHO gear shift knob replacement

Post by bdfrench » Sat Nov 04, 2017 5:51 pm

AG1Z-7213-CA
That's the part number for the shifter handle. I can find it online for around $50 or so.
What I can't find details on is does this come with the two screws? Mine has one missing.
My chrome insert is also peeling. I had this replaced several years back but what I don't k now is can I by the screws and chrome trim piece just by themselves? And does anyone have the part numbers for those two items.

dhborden
New Member
Posts: 3
Joined: Sun Jun 12, 2016 9:22 pm
Vehicle: 2011 Taurus SHO

Re: 2011 SHO gear shift knob replacement

Post by dhborden » Fri Nov 17, 2017 12:31 pm

Does anyone have some pictures they can post to show what trim needs to be pulled back to access the torx screws?

dhborden
New Member
Posts: 3
Joined: Sun Jun 12, 2016 9:22 pm
Vehicle: 2011 Taurus SHO

Re: 2011 SHO gear shift knob replacement

Post by dhborden » Fri Nov 17, 2017 12:37 pm

Nevermind. I found a video for exactly this issue. See https://www.youtube.com/watch?v=H-nCD_WqhXU

Post Reply