If you shop at Amazon.com (for anything), use this link to support FordTaurus.net!

Police Vinyl Floor

Post Reply
GhostRider
Regular Member
Posts: 719
Joined: Wed Oct 10, 2012 7:34 am
Location: Ohio
Vehicle: 2013 Ford Taurus Limited

Police Vinyl Floor

Post by GhostRider » Fri Jul 12, 2013 10:18 pm

In looking for vinyl floor to replace the carpet in a Police Interceptor Sedan I am spec'ing. The car has the Police Interior Upgrade, which deletes vinyl floor and adds carpet. In my Crown Victoria Police Interceptors, I have had vinyl floor and its much easier to keep clean then carpet and looks factory rather then putting in WeatherTech mats (which I will if I have to).

According to the link (below), it looks like its offered in 2 sections (kinda sucks), front and rear.

http://www.lakelandfordparts.com/showas ... ly=1144230

So which part numbers do I need?

Even though it looks like it is not offered with the Interior Upgrade Package, it looks like Ford offers it separately even if you have the console.

With the vinyl floor, it comes with a console plate across it. When you remove it, you get this big gap. The gap was not there on the CVPI and its not there in the pictures in the link above.
Attachments
'13 Police Interceptor Floor 2.jpg
'13 Police Interceptor Floor 2.jpg (50.17 KiB) Viewed 1652 times
'13 Police Interceptor Floor 1.jpg
'13 Police Interceptor Floor 1.jpg (76.52 KiB) Viewed 1652 times
2013 Ford Taurus Limited FWD (301A Package)


jmr061
Regular Member
Posts: 689
Joined: Thu May 23, 2013 3:48 pm

Re: Police Vinyl Floor

Post by jmr061 » Sun Jul 14, 2013 1:04 pm

From doing installs I do recall the rubber floor being split front and rear. Looks like your photos are with carpeting. The early 2013 PI Sedans with rubber floors did not have a big opening across the middle like that but there are some openings in it for the console base plate bolts and I am thinking perhaps above the module that sits on the hump as well. Your not going to find carpet or rubber flooring that covers everthing if that is what you are thinking.

Jason
Jason
2016 Edge Sport
www.FordPIMods.com
I was looking over your site and wanted to say, thank you for all the info. - CrownedKing 11/2015

jmr061
Regular Member
Posts: 689
Joined: Thu May 23, 2013 3:48 pm

Re: Police Vinyl Floor

Post by jmr061 » Sun Jul 14, 2013 1:20 pm

Jason
2016 Edge Sport
www.FordPIMods.com
I was looking over your site and wanted to say, thank you for all the info. - CrownedKing 11/2015

GhostRider
Regular Member
Posts: 719
Joined: Wed Oct 10, 2012 7:34 am
Location: Ohio
Vehicle: 2013 Ford Taurus Limited

Re: Police Vinyl Floor

Post by GhostRider » Sun Jul 14, 2013 1:41 pm

jmr061 wrote:Your not going to find carpet or rubber flooring that covers everthing if that is what you are thinking.
Jason, I just wish it wasnt 2 pieces. I dont recall it being that way since the 1994 P71's. I guess they all have that big opening now across the transmission hump if you remove the metal console mount. Obviously in mine, the factory console offered in the Interior Upgrade will go over it.

I guess I just wanted to be certain there werent 2 different kinds which sometimes Ford offers.

Its funny, you cant find that part on the website if you select "Police Interceptor Sedan" but can find it if you select "Ford Taurus"
2013 Ford Taurus Limited FWD (301A Package)

jmr061
Regular Member
Posts: 689
Joined: Thu May 23, 2013 3:48 pm

Re: Police Vinyl Floor

Post by jmr061 » Sun Jul 14, 2013 7:44 pm

I actually did it by vin. Used the squad vin ;)
Jason
2016 Edge Sport
www.FordPIMods.com
I was looking over your site and wanted to say, thank you for all the info. - CrownedKing 11/2015

Post Reply