If you shop at Amazon.com (for anything), use this link to support FordTaurus.net!

PI Sedan/SUV keyless entry with remote start retrofit

crownedking
Regular Member
Posts: 82
Joined: Fri Mar 18, 2016 1:03 pm
Location: MN
Contact:

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by crownedking » Fri Jan 27, 2017 9:54 pm

correct

mid-2014-through 16 enable below:

726-18-01 0100 0008 4F

720-01-03 8088 0000 33

Can you confirm both worked or did one work and the other didn't? What remotes are you using?
DON'T buy from paid PI mod sites, stay away from dealer programming! message me for help or questions.

"If you believe you can figure it out on your own then by all means do feel free to do so. I have nothing against people who want to do it on their own. I am not aware of anyone else that has done it though." - jmr061 - Jason Rasmussen


Sterling_Ceptor
Regular Member
Posts: 39
Joined: Sat Dec 10, 2016 4:40 pm
Vehicle: 2016 Ford PI Sedan

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by Sterling_Ceptor » Sat Jan 28, 2017 12:03 pm

Ok. So putting the 2013 programming in causes the trunk button not to work on the remote.

That's what i did on accident. New programming in and wala, button works.
2016 Ford PI Sedan

Fmnunes2803
New Member
Posts: 7
Joined: Fri Feb 03, 2017 1:43 pm
Vehicle: 2014 Taurus PI

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by Fmnunes2803 » Tue Feb 07, 2017 11:50 pm

Are these the correct changes for the 14 TAURUS PI....can anybody confirm?..thanks in advance.


726-18-01 0100 0008 4F

720-01-03 8088 0000 33

Fmnunes2803
New Member
Posts: 7
Joined: Fri Feb 03, 2017 1:43 pm
Vehicle: 2014 Taurus PI

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by Fmnunes2803 » Wed Feb 08, 2017 5:28 pm

Thanks to this awesome forum I was able to get the keyless entry on my 14 Taurus PI working....you guys are awesome!!!!

nevcofleet
Regular Member
Posts: 16
Joined: Wed Nov 02, 2016 9:02 am
Vehicle: 200+ Ford Fleet

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by nevcofleet » Wed Feb 22, 2017 12:20 pm

crownedking wrote:correct

mid-2014-through 16 enable below:

726-18-01 0100 0008 4F

720-01-03 8088 0000 33

Can you confirm both worked or did one work and the other didn't? What remotes are you using?

That's to enable the remote start?
Nevco Fleet Services

Michael11
Regular Member
Posts: 10
Joined: Thu Feb 09, 2017 3:35 pm
Vehicle: 2014 Police Interceptor

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by Michael11 » Fri Feb 24, 2017 3:10 pm

Thanks!!!!! Just enabled keyless on my 2014. Worked great, thanks for sharing

nevcofleet
Regular Member
Posts: 16
Joined: Wed Nov 02, 2016 9:02 am
Vehicle: 200+ Ford Fleet

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by nevcofleet » Mon Feb 27, 2017 6:50 pm

Here's the ForScan edits for enabling remote start (the above is for the keyless entry only):

720-01-03 90E8 00CB A2

726-19-01 0147
Nevco Fleet Services

kyledooley
Regular Member
Posts: 35
Joined: Sat Jan 21, 2017 4:16 pm

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by kyledooley » Sun Mar 05, 2017 7:19 am

nevcofleet wrote:Here's the ForScan edits for enabling remote start (the above is for the keyless entry only):

720-01-03 90E8 00CB A2

726-19-01 0147
So this combination will give you keyless PLUS remote start? (I know that might be a silly question, but just being thorough)

And is this for '13/early' 14, '14 up, or all?

Kyle

trife86
Regular Member
Posts: 19
Joined: Wed Mar 01, 2017 5:08 pm
Vehicle: 2013 PI Sedan

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by trife86 » Wed Mar 08, 2017 4:05 pm

If I order a hood switch what are the changes I also add to enable remote start?

evader
New Member
Posts: 5
Joined: Sun Oct 16, 2016 8:02 pm
Vehicle: 2013 Ford Explorer Interceptor

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by evader » Sat Mar 11, 2017 8:04 pm

nevcofleet wrote:Here's the ForScan edits for enabling remote start (the above is for the keyless entry only):

720-01-03 90E8 00CB A2

726-19-01 0147
Apologies in advance.

I know I probably shouldn't have but I tried 90E8 00CB E6 on my 2013 Ford Explorer Police Interceptor and 0148 @ 726-19-01 --- which I obtained from the FordExplorer Forums. I now have remote start showing in the dash settings however I am unable to get my DS7Z-15K601-F remote start transmitter to program.

These are the instructions for programming the transmitter.

1 Start with doors unlocked
2 Driver's door open (remaining open throughout)
3 Verify that the gearshift lever is in the "PARK" position.
4 Depress and hold brake pedal.
5 Start with ignition key OFF.
6 Cycle ignition key to the ON then OFF position 5 times, then back to the ON position a 6th time.
▪ The horn will honk 3 times to indicate transmitter learn mode access.
7 Press the START button on each transmitter you wish to program. The horn will honk 1 time
each time the START button is pressed to indicated the transmitter has been learned.
8 Cycle ignition key to the OFF position to exit transmitter learn mode.
9 NOTE:
If the security jumper is installed the vehicle security features are disabled.
If previously removed, reinstall the VSS module security jumper. For additional information,
refer to "VSS Module - Optional Vehicle Security Features".

I'm going to go look for the VSS module security jumper now...

trife86
Regular Member
Posts: 19
Joined: Wed Mar 01, 2017 5:08 pm
Vehicle: 2013 PI Sedan

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by trife86 » Mon Mar 13, 2017 7:01 pm

Do you have a hood switch?

nevcofleet
Regular Member
Posts: 16
Joined: Wed Nov 02, 2016 9:02 am
Vehicle: 200+ Ford Fleet

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by nevcofleet » Tue Mar 14, 2017 9:25 am

kyledooley wrote:So this combination will give you keyless PLUS remote start? (I know that might be a silly question, but just being thorough) And is this for '13/early' 14, '14 up, or all? Kyle
This was done on a '16, that was factory equipped with keyless - I had to add the hood switch & integrated key fob, but the hood switch harness was in the car from the factory.
Nevco Fleet Services

trife86
Regular Member
Posts: 19
Joined: Wed Mar 01, 2017 5:08 pm
Vehicle: 2013 PI Sedan

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by trife86 » Tue Mar 14, 2017 10:49 am

Nevco, you wrote 726-19-01 0147 so are you only changing the first 4 digits of that line? its not a full line of code?

Muxlow
New Member
Posts: 4
Joined: Thu Mar 16, 2017 1:13 am
Vehicle: 2013 Police utility

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by Muxlow » Thu Mar 16, 2017 1:50 am

evader wrote:2013 Ford PI Utility / Explorer 4WD

720-01-03 - Change to --- 808A 0000 35
726-18-01 - Change to --- 0100 0005 4C
Can confirm this worked on my 2013 police utility. Does this also enable remote start?
Lock/Unlock works

nevcofleet
Regular Member
Posts: 16
Joined: Wed Nov 02, 2016 9:02 am
Vehicle: 200+ Ford Fleet

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by nevcofleet » Tue Mar 21, 2017 10:39 am

trife86 wrote:Nevco, you wrote 726-19-01 0147 so are you only changing the first 4 digits of that line? its not a full line of code?
That line the whole thing is only 4 digits.
Nevco Fleet Services

trife86
Regular Member
Posts: 19
Joined: Wed Mar 01, 2017 5:08 pm
Vehicle: 2013 PI Sedan

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by trife86 » Tue Mar 21, 2017 6:29 pm

LOL Sorry buddy i didnt look at that line i expected it to be full length, Add a hood switch with that and thasts all thats needed? along with a remote that has the start button of course

jtblkice
New Member
Posts: 2
Joined: Mon Mar 27, 2017 10:43 am
Vehicle: 2014 PI sedan

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by jtblkice » Mon Mar 27, 2017 10:45 am

I have a 2014 PI... what keyless fobs are yall using? one with the built in key or just a remote fob?? thanks

mope
Regular Member
Posts: 145
Joined: Mon Oct 03, 2016 4:11 pm
Vehicle: 2013 Interceptor

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by mope » Mon Mar 27, 2017 11:05 am

Integrated with key - 5 button (from ebay, in my case)

jtblkice
New Member
Posts: 2
Joined: Mon Mar 27, 2017 10:43 am
Vehicle: 2014 PI sedan

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by jtblkice » Mon Mar 27, 2017 11:36 am

I guess i should add mine has just a standard fleet key. so is it ok to get just the cheap 4 button fob or do i need an integrated key?

trife86
Regular Member
Posts: 19
Joined: Wed Mar 01, 2017 5:08 pm
Vehicle: 2013 PI Sedan

Re: PI Sedan/SUV keyless entry with remote start retrofit

Post by trife86 » Mon Mar 27, 2017 2:17 pm

jtblkice wrote:I guess i should add mine has just a standard fleet key. so is it ok to get just the cheap 4 button fob or do i need an integrated key?
Well the 4 button fob don't have remote start button so might as well get the 5 button key

Post Reply