If you shop at Amazon.com (for anything), use this link to support FordTaurus.net!

Enable AWD display

Post Reply
mymangochutney
Regular Member
Posts: 72
Joined: Thu Jun 14, 2018 9:50 pm
Vehicle: Taurus FPIS 2013

Enable AWD display

Post by mymangochutney » Thu Jun 14, 2018 9:52 pm

In forscan open the IPC and change "720-01-02" FIRST character from 8 to B

BEFORE
awd before.PNG
BEFORE
awd before.PNG (35.2 KiB) Viewed 369 times

AFTER
awd after.PNG
AFTER
awd after.PNG (33.84 KiB) Viewed 369 times


kamloopsdan
Regular Member
Posts: 14
Joined: Wed May 30, 2018 10:15 pm
Vehicle: 2013 PI Sedan

Re: Enable AWD display

Post by kamloopsdan » Fri Jun 15, 2018 12:16 pm

Thanks, I enabled this feature last week after finding this other helpful guide.

http://briansbench.com/2017/02/25/unloc ... an-taurus/

crownedking
Regular Member
Posts: 82
Joined: Fri Mar 18, 2016 1:03 pm
Location: MN
Contact:

Re: Enable AWD display

Post by crownedking » Mon Nov 26, 2018 10:49 pm

This is not a click and enable feature in forscan. No bit change needed anymore.
DON'T buy from paid PI mod sites, stay away from dealer programming! message me for help or questions.

"If you believe you can figure it out on your own then by all means do feel free to do so. I have nothing against people who want to do it on their own. I am not aware of anyone else that has done it though." - jmr061 - Jason Rasmussen

Post Reply