Page 1 of 1

Need a set of center caps for a 2016.

Posted: Tue Sep 03, 2019 8:37 pm
by atikovi
Would caps from any of the earlier Crown Vics fit? Anybody selling some?

Re: Need a set of center caps for a 2016.

Posted: Thu Sep 05, 2019 10:21 am
by GonzoWerke
Ford PI Sedan caps = DG1Z-1130-C

Re: Need a set of center caps for a 2016.

Posted: Thu Sep 05, 2019 10:30 am
by atikovi
Yes I know that number thanks. Assume the Crown Vic style doesn't fit then?

Re: Need a set of center caps for a 2016.

Posted: Thu Sep 05, 2019 12:35 pm
by andynumbers
The Crown Vic hubcaps do work, but they look slightly different. I have the 'Vic hubcaps on mine. I personally like the look better than the official PIS/PIU hubcap. The downside is that the Vic hubcap has a bit of an air gap behind it (it sticks out). The newer hubcap should cover this up. You can compare the two styles from these two ebay links:

https://ebay.us/ZFANMQ

https://ebay.us/19amhq

Also, remember you need to have the right lugnuts so that the hubcaps can "grab on" to the lugnuts. But if you already had the police wheel covers you should already have them.

Re: Need a set of center caps for a 2016.

Posted: Thu Sep 05, 2019 12:42 pm
by atikovi
OK I see that now.