5 posts • Page 1 of 1
I've noticed a sound coming from my car between 35 and 65 mph that sounds like two forks rubbing together. It's not a grinding like bad breaks but like two pieces of metal are just brushing against each other. My car also starts to shake around 55 to 65 mph, enough that my arms shake back and forth. Also the car pulls to the right. Any ideas what it is?
- Regular Member
- Posts: 164
- Joined: Sat Feb 14, 2009 11:48 am
- Location: CLeveland Ohio Area
- Vehicle: 2011 Flex SE
Wheel bearing? CV joint?
That's what I've been finding online too. I just don't know if I want to do it myself or take it in.
Also every time I hit a bump it squeaks.
How sure are you that it’s not the brakes? I’ve had abutment clips for caliper brackets out of place sound like “forks rubbing together.” That wouldn’t explain the pulling though, unless you have a stuck caliper. That’s happened to me in rear brakes on my Tauruses but not front. Just a thought..
- 2013 Taurus SEL loaded (3.5L flexfuel)
- 2012 Taurus SEL loaded (3.5L)
- 2006 Fusion manual (2.3L)
- 2001 F150 manual 4x4 (4.2L)
-1994 Ranger manual 4x4 (4.0L)