If you shop at Amazon.com (for anything), use this link to support FordTaurus.net!

intkey could not program and airbag light

Post Reply
Kangel
New Member
Posts: 4
Joined: Sat Nov 04, 2017 11:41 am
Vehicle: 2008 Taurus Limited

intkey could not program and airbag light

Post by Kangel » Sat Nov 04, 2017 11:59 am

I just bought a used one owner 2008 Tarus Limited with 45000 miles on it. The car is emaculate looking with excellant carfax. Few things, it has the,"intkey could not program " when key is turned on. Both keys work everything. Came with two keys from Ford, you can tell which one she used all the time. I noticed there was no horn chirp just parking light flash a few times when double click lock button, also when I push the keyless entry code no horn chirp. Other issue is the airbag light stays on, checked under seats everything looks hooked up nice and tidy. I notice if you turn key on it will just keep flashing until you pull seat belt then after started its solid. Any ideas on these issues?


Kangel
New Member
Posts: 4
Joined: Sat Nov 04, 2017 11:41 am
Vehicle: 2008 Taurus Limited

Re: intkey could not program and airbag light

Post by Kangel » Sat Nov 04, 2017 12:10 pm

I just discovered after posting the horn dont work...lol

Kangel
New Member
Posts: 4
Joined: Sat Nov 04, 2017 11:41 am
Vehicle: 2008 Taurus Limited

Re: intkey could not program and airbag light

Post by Kangel » Sat Nov 04, 2017 1:32 pm

Well replaced fuse on horn, still no horn. All other buttons work on wheel.

Kangel
New Member
Posts: 4
Joined: Sat Nov 04, 2017 11:41 am
Vehicle: 2008 Taurus Limited

Re: intkey could not program and airbag light

Post by Kangel » Sun Nov 05, 2017 2:46 pm

Well after looking around the web Im thinking the clock spring might be bad which would eliminate both issues. Do I know for sure....NO..lol

Post Reply