If you shop at Amazon.com (for anything), use this link to support FordTaurus.net!

Need a set of center caps for a 2016.

Post Reply
atikovi
Regular Member
Posts: 55
Joined: Wed Mar 21, 2007 12:51 pm
Location: Suburban Washington DC

Need a set of center caps for a 2016.

Post by atikovi » Tue Sep 03, 2019 8:37 pm

Would caps from any of the earlier Crown Vics fit? Anybody selling some?


GonzoWerke
Regular Member
Posts: 110
Joined: Wed Nov 07, 2018 2:20 am
Vehicle: 2013 Police Interceptor

Re: Need a set of center caps for a 2016.

Post by GonzoWerke » Thu Sep 05, 2019 10:21 am

Ford PI Sedan caps = DG1Z-1130-C

atikovi
Regular Member
Posts: 55
Joined: Wed Mar 21, 2007 12:51 pm
Location: Suburban Washington DC

Re: Need a set of center caps for a 2016.

Post by atikovi » Thu Sep 05, 2019 10:30 am

Yes I know that number thanks. Assume the Crown Vic style doesn't fit then?

andynumbers
Regular Member
Posts: 29
Joined: Mon Aug 05, 2019 3:28 pm
Vehicle: 2015 FPIS 3.7 AWD

Re: Need a set of center caps for a 2016.

Post by andynumbers » Thu Sep 05, 2019 12:35 pm

The Crown Vic hubcaps do work, but they look slightly different. I have the 'Vic hubcaps on mine. I personally like the look better than the official PIS/PIU hubcap. The downside is that the Vic hubcap has a bit of an air gap behind it (it sticks out). The newer hubcap should cover this up. You can compare the two styles from these two ebay links:

https://ebay.us/ZFANMQ

https://ebay.us/19amhq

Also, remember you need to have the right lugnuts so that the hubcaps can "grab on" to the lugnuts. But if you already had the police wheel covers you should already have them.

atikovi
Regular Member
Posts: 55
Joined: Wed Mar 21, 2007 12:51 pm
Location: Suburban Washington DC

Re: Need a set of center caps for a 2016.

Post by atikovi » Thu Sep 05, 2019 12:42 pm

OK I see that now.

Post Reply